Iron On Reflective Heat Transfer Film – Grey

Description

• Attachment Type: Iron On or Heat Transfer
• Daytime Color: silver
• Backing fabric: PET film and hot melt adhesive
• Reflective coefficient: ＞420
• Home Wash Cycles: Up to 50 cycles @60°C (140°F), depends on the condition of substrates and heat transfer operations.
• Width: up to 105cm, all sizes available
• Certification: ANSI/ISEA 107-2015
• Application: suitable for anti-light heat on non-elastic fabrics such as polyester and knitting
• HOW TO APPLY 1.Cut the iron on / heat transfer reflective tape to desired length. 2.Set the heat temperature of iron at about 120*C 3.Place the tape by adhesive side down on the fabric. 4.Put the iron on the tape and move it along the tape pressing firmly. you need 15-30 seconds to let the tape be attached to the fabric. 5.Wait for 10-15 seconds to let it cool. 6.Carefully peel off the transparent film from the applied reflective tape. 7.Cover attached reflective tape with a piece of cloth and iron on for a 2-3 seconds. 8.Remove cloth and admire your work!! 9.Always remember, IF IN DOUBT, DO A TRYOUT with a 2” x 1” size tape on a scrap piece of fabric